Re: use an existing license for temporarily storage vmotion some vms
thanks, I am aware of the license breach but it will be to avoid to reinstall the actual host and it s just for moving a bunch of vms.
View ArticleRe: vCD Upload timeout
Total amount for a single VM being uploaded. Thinking is, if we fail in the middle, we'll delete it anyways. So might as well be patient and get the whole thing uploaded, check it, then ship it off...
View ArticleRe: A Couple of Newbie Questions
Thanks, Matt. I got the license installed so that part is perfect. I'm not sure what the make and model os the nic is off the top of my head. I will have to open the box up and have a look later on....
View ArticleVM with memory Limit
Dear All, i have a VM with 3vCPU and 12 GB of RAM running heavy tasks on it. Customer reports that on every monday the VM goes unavailable for 10 minutes and it affects production. Earlier VM Settings...
View ArticleClik here to view.
Re: Esxi 5.1 pci passthrough broken
my server also tried USB 3.0 card to do passthrough. it is also failed. I already give it up.
View ArticleRe: Hosts briefly disconnecting from vCenter
Thanks for the reply. It does not appear that we are experiencing any problems on the network side. I've found another thread where others are experiencing the same issue - it seems to be related to...
View ArticleRe: "Vcenter alarm: ESXi 5.1 Host connection failure/ Host not responding"
Robuea, I have seen that exact "bad record mac" error. HP diagnostics showed no problems. We replaced all of the blade hardware and it ended up being the last thing we replaced, a bad CPU. I don't...
View ArticleRe: Cannot connect the connection server to composer
All firewalls are disabled and can ping from each other.DNS resolution is also working fine.
View ArticleRe: HORIZONTAL scrolling of Magic | Mighty mouse
Just to reiterate my previous comment. Works in Win8 and no other OS.
View ArticleClik here to view.
Re: advice for very small installations--where?
The main reason to install vCenter is that you've purchased it already By the time you've bought two servers, a SAN, and enough VMware licensing to run three servers (you have) you really should try...
View ArticleRe: ESXi 5.1 (799733) and vCenter
Thanks Guys. Business is not keen on going for the most recent release so looks like I will be going with VMware vCenter Server 5.1.0b been out for a while. Any advise or suggestions with this one?
View ArticleRe: Prevent maintenance mode boot after power failure
I know it is probably not much comfort but I thought I would test and see what happens here. To that end I created a virtual ESXi server and configured the Virtual Machine Startup and Shutdown...
View ArticleRe: Upgrade to vCenter 5.1 update 1 SSO failing
Yes... you need to be careful during the replication process. The data will be overwritten. Recommendation is to not do any changes to the PROD while DR is being built otherwise these will get...
View ArticleRe: Lun Offset Question - NetApp Filers
You have to create an optimized datastore for each different offset. Why don't you use the VSC Optimization and Migration "Scan Manager"? It will help you (a little bit...) to find out the needed offsets.
View ArticleRe: Assistance needed enabling nested vSphere 5.0 U2 FT on Sandy bridge Xeon...
Adding the replay advanced options per the virtuallyghetto blog post does not resolve the FT issue. The small (1GB RAM 1 vCPU) nested 32bit VM I am using to test FT fails to start the secondary FT vm...
View ArticleIBM TAM e-sso not working in vmware view 5.2 with PoIP
Hi, with refer to subject i am doing a testing of vmware view 5.2 in my lab, I have found TAM e-sso is not working with PoIP protocol, the same works with MS-RDP. My lab details. ESXi 5.1U1/vCenter...
View ArticleRe: Prevent maintenance mode boot after power failure
Okay after further testing I have come up with a theory - not a good theory but a theory anyway. Something was rattling around in my head about how often ESXi saves (backs up) configuration data to...
View ArticleRe: connect-viserver error on 5.1 hosts only
Afaik no. Could it be that the port (443) is not open from the client where you run PowerCLI to these ESXi servers ?You can try to connect over port 80 (Protocol and Port parameters on the...
View ArticleRe: ASSERT...
Darius - or anyone else....We are getting the same error. We tried your suggestion with no success. We paid for Technical support and spent 4 hours on the phone with no success. They said we had an...
View Article